Click to enlarge
Picture: JM CHERRY
AA-22 - 149.95 US$
FEATURES
 |
Three stage solid-state power amplifier and dual-gate FET receiver preamplifier Automatic solid-state switching between transmit and receive Power transistors are protected when operating into an improper load Harmonic output is reduced by a built-in low pass filter May be used with the TR-22 or any transceiver with up to one watt output power |
AA-22 SPECIFICATIONS:
|
Frequency Coverage: 144 - 148 MHz |
|
RF Output Power: 25 Watts minimum at 13.8 Volts DC and rated input power. |
|
RF Input Power: 0.5 Watts nominal, 1 Watt maximum |
|
Preamplifier Sensitivity: 0.25 Microvolts for 20 dB of quieting when used with a TR-22 Transceiver. |
|
Harmonic Radiation: All harmonics are at least 60 dB below the carrier level. |
|
Controls and Connectors: Type SO-239 Antenna Connector, Type SO-239 Transceiver Connector, Phono jack for an auxiliary low power switch |
|
20 Semi-conductors |
|
Power Requirements: 13.8 V DC at 7.0 Amperes |
|
Dimensions: 3-1/16" high, 3-1/16" deep, 11" wide (7.8 cm, 7.8 cm, 28 cm). Weight 3-1/2 pounds (1.58 kg) |