The RV-6 is designed for use with the TR-6 (or TR-4) transceiver to permit reception, transmission or both transmission and reception on a frequency removed from the VFO setting of the transceiver is tuned, but in the same range to which the transceiver is tuned.  

The RV-6 consists of a highly stable permeability tuned VFO, employing an FET in its solid state design, a cathode follower, and associated control circuitry.

The unit is housed in an attractive cabinet which matches the transceiver and contains a 5-inch 4 ohm speaker.

Our model AC-4 (or AC-3) power supply can also be housed in this cabinet.  (See AC-4 instructions.)  

The dimensions are as follows: 

	5-3/8 inches high,
	10-3/4 inches wide,
	11-1/8 inches deep.

Weight  6-1/2 pounds.