|
|
Power supply for CC-1 Converter Console
DESCRIPTION
 | The CPS-1 Power Supply is a completely solid-state power supply employing silicon diodes in a full-wave bridge rectifier circuit. Filtering is accomplished by a 1000 mfd electrolytic capacitor. |
| The unit operates from a 120 V, 50/60 Hz source. |
| TheCPS-1 is designed to power the DRAKE models SCC-1 and SC-2 together, or the SCC-1 and the SC-6 together. |
| An On-Off switch is used in the primary of the transformer to turn the unit on and off. |
| The power socket is a Cinch-.Jones S-302-AB which mates with a Cinch-Jones P-302-AB plug. |
| Overload protection is provided by a 2/10 ampere fuse in the transformer primary. This fuse is soldered across two teminals on the back of the power supply printed circuit board. |
INSTALLATION
| The CPS-1 is connected to either the SC-2 or SC-6 simply by plugging the units together. When used with the SCC-1 calibrator, the power supply is plugged into one side of the SCC-1 and either the SC-Z or SC-6 is plugged into the other side of the SCC-1. The CPS-1 On-Off switch supplies power to both the calibrator and the converter. |
| A short metal strap is provided to bond the CPS-1 and the converter together for mechanical rigidity and will help minimize I.F. feed thru if this is a problem in a particular location. The strap is mounted under one screw in each cover. |
| For installation in the converter console CC-1, consult the CC-1 instruction manual. |
SPECIFICATIONS
| POWER OUTPUT:
| ||||||
| PHYSICAL:
|
